Aerial platform truck operating procedures

I. Introduction

Aerial work platforms are common mobile work equipment, primarily used for work and maintenance at heights. When operating an aerial work platform, it is imperative to follow operating procedures to ensure safety. This article will introduce the latest operating procedures for aerial work platforms for operators' reference.

II. Pre-Operation Preparation

1. Safety Inspection: Before operating an aerial work platform, the aerial work platform must be inspected to ensure that all components and safety equipment are functioning properly and free of any abnormalities.

2. Ensure the Safety of the Work Area: Before operating an aerial work platform, the work area must be clear of personnel and objects, and warning signs must be posted to ensure safety.

3. Familiarize Yourself with the Workflow: Before operating an aerial work platform, you must be familiar with the operating procedures and clearly understand the objectives and methods of the operation.

III. Getting on and off the Platform

1. Getting on and off the Platform: Before getting on the platform, check that the buttons and indicators on the control panel are functioning properly and that the cab door is securely closed to ensure safe entry.

2. Disembarking: When disembarking, the aerial work platform must be powered off and the vehicle must be securely parked on stable ground before opening the cab door.

IV. Workflow

1. When performing lifting operations, first observe the work area, determine the target, and then perform the lifting operation in accordance with the operating procedures.

2. During the lifting process, always pay attention to the safety of the work area. If any objects or personnel enter the work area, immediately stop the lifting operation and wait until the work area is safe before continuing.

3. After the lifting operation is completed, the aerial work platform must be lowered and the power supply completely shut off.

V. Safety Precautions

1. When performing lifting operations on the aerial work platform, the entire vehicle must be kept stable. Rapid movements or repeated ups and downs are prohibited.

2. Personnel on the aerial work platform must wear seat belts and must not stand or walk at will.

3. When using an aerial work platform, ensure wind speeds are less than force 7. Do not operate in thunderstorms, heavy fog, or areas with electrical wires and blinds.

4. Always maintain clear communication channels during aerial work platform operations to prepare for emergencies.

5. After completing an aerial work platform operation, the vehicle must be cleaned and all equipment and tools must be returned to their proper locations and archived.

[Conclusion]

Aerial work platform operations require strict adherence to operating procedures to ensure safety. This article introduces the operating procedures for aerial work platforms, which are crucial for operators to master these procedures, standardize their work practices, and improve operational safety. During daily use of aerial work platforms, attention should also be paid to ensuring proper maintenance and upkeep to ensure their safety.