Aerial vehicle troubleshooting

I. Classification of aerial platform failures

1. Mechanical failure: refers to damage or failure of aerial platform components, such as damage to motors, pumps and other mechanical components.

2. Electrical failure: refers to problems with the aerial platform's electrical system, such as circuit failure, electrical failure, poor line contact, etc.

3. Hydraulic failure: refers to problems with the aerial platform's hydraulic system or partial leakage, loose pipes, etc.

II. Common aerial platform failure treatment methods

1. Mechanical failure treatment methods:

(1) Adjust the air pressure of the aerial platform's drive wheel. Sufficient air pressure is conducive to better performance of the aerial platform during operation.

(2) Check the installation status of the main components of the aerial platform, such as whether the motor is operating normally and whether the transmission parts are operating smoothly.

2. Electrical failure treatment methods:

(1) Check whether the aerial platform circuit is normal and whether the electrical equipment is damaged or failed.

(2) Repair the aerial platform's electrical system and replace damaged electrical appliances. 

3. Hydraulic fault handling methods:

(1) Check whether the hydraulic system of the aerial work platform is leaking or the pipes are loose.

(2) Clean the hydraulic pipes in time and enhance the sealing performance of the pipe joint sealing materials.

III. Prevention measures for aerial work platform faults

1. Strengthen daily maintenance: Regularly check the various parts of the aerial work platform, and do a good job of cleaning and lubricating to reduce the occurrence of mechanical, electrical, hydraulic and other faults.

2. Precautions for use: When operating the aerial work platform, be careful not to overload, exceed the operating time, over-operate and other incorrect operations to avoid safety hazards and faults.

IV. Conclusion

Troubleshooting aerial work platform faults is an important task in aerial work. This article provides a detailed introduction from the aspects of fault types, handling methods, and preventive measures. It is hoped that readers can learn more about aerial work platform fault handling methods and enhance the safety of aerial work.