E-mail: [email protected]

Tel: +86 18153223261

Add: No.9 Wanglan Road, Longquan Street, Jimo, Qingdao.

  • HBT80S-16-132

HBT80S-16-132

On the basis of mature electric commutation technology,we have developed overall hydraulic concrete pumps with excellent performance. This hydraulic system deletes PCL, constent pressure pump, accumulator and approach switch four parts that are extremely damageable parts in electronic commutation system. It greatly improves the reliability of the machine and makes sure it can work in any hard condition. Our various motor concrete pumps( diesel engine concrete pumps) mainly cover capacity from 30-120m³/h and pressure from 5-20Mpa.

Share:

Description:

HBT and DHBT series concrete pump


Full hydraulic control features and advantages of the hydraulic system

Extend component life

overall hydraulic commutation system: the alternative commutation actions between pumping and S tube distribution doesn't involve electric signals. Little impact and noise occurs during the commutation, so the service lives of the hydraulic pump and valves are evidently lengthened.

Improve equipment reliability

Overall hydraulic system saves the intermediate process of the electric signals. In this way, the reliability of the whole equipment is greatly increased.

Reduce the failure rate

Full hydraulic commutation system adopts centralized valve plate, the hydraulic valves of main system are centralized in one valve plate. The number of cross-connected pipelines is reduced, the system gets more compact, at the same time the oil leaking possibility is decreased.

Reduce maintenance costs

Full hydraulic commutation system, deleting four parts extremely damageable in the electronic commutation system, reduces equipment maintenance costs.


specification:

ItemUnitParameters
Whole machines performanceMax. Theoretic delivery volumem³/h80
Max. Theoretic delivery pressureMpa15.7
Max. Delivery frequencytimes/min23
Max. Theoretic delivery heightm240
Max. Theoretic delivery distancem600
Type of distribution valve
S tube valve
Specification of delivery cylindermmΦ200×1800
Specification of main oil cylindermmΦ140/Φ90×1800
Oil tank capacityL500
Hopper capacityL600
Feeding heightmm1400
Outlet opening diametermmΦ185
Inner diameter of delivery pipemmΦ125
Power systemMain Motor powerKw132
Rated voltage V380
Rated speedr/min1480
Hydraulic systemHydraulic oil circuit type
Open circuit
Max. Oil pressure of pumping systemMPa32
Max. Oil pressure of mixing systemMPa14
Max. Mixing speedr/min24
Other parametersAllowed range of concrete slumpmm80~200
Max. Aggregate diametermmPebble 50,crushed stone40
Dimension(length×width×height)mm6170×1930×2100
Overall weightKg6200
Pulling speedKm/h≤8


PHOTOS:


DHBT50-13-85


inquiry: WE WILL CONTACT YOU WITHIN 24 HOURS