E-mail: [email protected]

Tel: +86 18153223261

Add: No.9 Wanglan Road, Longquan Street, Jimo, Qingdao.

  • HG32 Hydraulic Climbing Concrete Placing Boom

HG32 Hydraulic Climbing Concrete Placing Boom

HG32 is hydraulic climbing concrete placing boom with concrete placing radius 32m, used for placing concrete onto certain place, which is good partner with trailer concrete pump.

Share:

Description:

Horizontal reach: 28-36m (not Including the end hose), Mode of drive: fully hydraulic;

the climbing type concrete placing boom can be anchored to the floor with Initially prepared holes when working, and it can be lifted itself by its equipped climbing system, one lifting can meet the need of two floors concrete placement.

If the floor area is large, several tower bodies can be installed and move the boom assembly onto relevant tower body to meet the needs of certain area concrete placement and save cost.

Compact structure, easy operation, reliable safety, economical and practical, it can be installed on either floor or lift shaft.



specification:

Model
HG32
Delivery pipe dimension(outside diameter×thickness) (mm×mm)φ133×4.5
Delivery hose dimension (inside diameter×length)  (mm ×mm)φ125×3000
Radius of placing boom(m)31.7
Stationary height(to the join between the end of the boom and swivel   table(m)22.7
tower body mast section(mm)750x750
Slewing range(°)360
Power of motor(kw)15
Pressure of hydraulic system (MPa)31
Type of hydraulic oilAW68
The min.Interval   of climbingFrame (m)Climbing3.0
Placing concrete6.0
Resting
Mode of operation1.cable   remote control2.radio   remote control
power380V/50Hz
wind speedPlacing concrete≤60 km/h
Climbing≤28 km/h
working temperature0~60℃


PHOTOS


HG36 Floor Climbing Concrete Placing Boom


inquiry: WE WILL CONTACT YOU WITHIN 24 HOURS